During summer heat waves, central air conditioning can become one of the largest electrical loads in a home. Severe weather and other events can cause power outages, leaving homes without air conditioning when outdoor temperatures are high.

Many consumers are interested in knowing whether a whole-house generator will have enough capacity to run a central air conditioning system.

Power Demands of Central AC

Central air conditioners demand a significant amount of electricity, especially when the compressor kicks on. Every AC unit has two main power requirements: starting wattage and running wattage.

The starting wattage, sometimes referred to as surge wattage, is the amount of power required to start the compressor. The spike may be up to three times higher than the amount used when operating constantly.

A normal central air conditioning unit requires between 3,500 and 5,000 watts of energy to operate. But the initial starting surge can require 10,000 to 18,000 watts of electricity. Therefore, the emergency power generator should be capable of handling the AC system’s startup demand.

How Generator Sizing Works

Standby generators that can provide power to an entire house exist in different sizes; their capacity usually ranges between 12 kW and 26 kW. The process of calculating the required generator size depends on your air conditioner’s efficiency.

As home size increases, more tonnage is required from the AC system, which means more electricity usage. In addition to that, modern systems consume less energy compared to old systems at startup.

Other household appliances and electronic devices use the same electricity as the AC unit. If a standby generator lacks the necessary power output, the central air compressor simply will not turn on. Worse, an undersized power setup can damage sensitive electrical components inside your cooling equipment.

Using Soft Start Kits

Homeowners with smaller standby generators often install a soft start kit on their AC unit. This compact electronic device manages the voltage feed during motor startup. Instead of letting the compressor draw a massive spike of energy all at once, a soft start kit ramps up the power smoothly.

Installing a soft start kit cuts starting wattage demands by 50% to 70%. This simple upgrade lets smaller whole-house standby generators start a heavy central air unit without overload risks. It also reduces wear and tear on your air conditioner’s motor over time.

Automatic Transfer Switches

For example, a whole-house standby generator uses an Automatic Transfer Switch (ATS) to control the flow of power. The Automatic Transfer Switch will detect the lack of power from the utility company within seconds and start up the generator.

Modern transfer switches also feature load management capabilities. If your household runs multiple energy-heavy systems, like a central AC alongside an electric water heater, the ATS prioritizes circuits. It drops non-essential loads briefly so your AC receives the energy spike it needs to start smoothly.

Protect Your Home Comfort

A whole-house standby generator easily runs a central AC system when sized and installed correctly. Professional sizing evaluates your specific cooling equipment, startup surge requirements, and everyday household electrical needs to guarantee seamless backup power when bad weather strikes.

For assured generator installation services, call the professionals at PBR Power Systems. We install the whole-house standby generator system to provide you with uninterrupted central air conditioning during a blackout. For more information, contact us at (281) 508-1289.

Skip to content